What changes when you move to the cloud
eTimeTrackLite is eSSL’s attendance software. In its desktop form it runs on a Windows PC at the office and reads punches from the machine over your office network. eSSL advertises it as free, with the licence tied to the machine. It works well for many offices, especially one site with one person doing attendance.
With cloud attendance the direction turns round: the machine sends each punch over the internet to a server, the moment it happens. That changes a few things:
| Question | Desktop eTimeTrackLite | Cloud attendance |
|---|---|---|
| Where punches go | To the PC, when it reads the machine | To the cloud server, as each punch happens |
| A PC at the office | Needed, and switched on | Not needed |
| See attendance from home | Only with remote-desktop tools | From a browser or phone |
| Several branches | One PC per site, or network set-up between sites | Every machine dials out; all branches in one account |
| Backups | Your job | The vendor’s job |
| Monthly fee | Usually none | Yes, per employee or per tier |
If you would rather stay with eSSL’s own software, eSSL also sells a hosted version, eSSL Cloud, from ₹2,000 a month for 50 users and 2 machines (checked 11 November 2026). The steps on the machine are much the same for any cloud service; this post uses OTOMATE’s settings because they are the ones we can vouch for.
What stays the same
- The machine. No new hardware, as long as its COMM. menu has Cloud Server Setting or ADMS. Most current eSSL face and fingerprint machines do.
- Enrolled fingers, faces and cards. They stay on the machine. Nobody enrols again.
- Employee codes and names. When the machine connects, it sends its user list, and OTOMATE adds those people with the name and code on the machine.
- How staff punch. Same machine, same finger or face, same place on the wall.
OTOMATE does not ask the machine for fingerprint or face templates and does not store any it receives. It keeps the punch: who, when, which machine and how they verified.
What to export from the old software first
Do this before you change anything on the machine.
- Monthly attendance reports for the months you may need again, at least the current financial year, in Excel or PDF, whichever your software offers.
- Any reports you send to your accountant or payroll person every month, so you can check the first month in the cloud against them.
- A list of employees with their codes, departments and shift timings, to set up shifts and departments in the new software.
- Leave balances, if you keep them in the old software.
Keep the PC and its data for now. It is your record of the past months.
The switch, step by step
About ten minutes for the first machine. The full guide, with fixes, is how to connect an eSSL machine to the cloud.
- Internet at the machine. On the machine, open Menu › COMM. › Ethernet (or Wi-Fi) and turn on DHCP, or type in the IP address, gateway and DNS. No static IP and no port forwarding are needed.
- Open Cloud Server Setting. In COMM., open Cloud Server Setting, called ADMS on some models.
- Enter the server. Turn on Enable Domain Name, set the server address to
devices.otomateworld.comand the port to80. If the firmware only takes a numeric address, turn Enable Domain Name off and enter50.6.6.81. - Leave HTTPS and proxy off. These machines talk over plain HTTP, as their firmware expects.
- Check the date and time. Punches carry the machine’s own clock.
- Save and note the serial number from System Info or the sticker on the back.
- Add the machine in OTOMATE. Open Devices › Add device, choose eSSL (or ZKTeco), type the serial number and pick the time zone. The dialog tells you when the machine calls in.
- Punch once to test. The punch appears in the attendance log within seconds, and the staff on the machine appear with their codes.
ZKTeco and Secureye machines have nearly the same screens; see the eSSL setup page and the ZKTeco setup page.
OTOMATE tests each brand’s protocol with a simulator on every release, but we have not yet tested real eSSL models ourselves. We confirm your model with you on the setup call before you change anything.
The first month: checking before you rely on it
Cloud Server Setting holds one server address. Once it points at OTOMATE, live punches go to OTOMATE, instead of any server set there before. If your machine was sending to eSSL Cloud or another cloud service, that service stops getting new punches.
So for the first month, treat the old software as your record of the past and OTOMATE as the record from the switch date. A sensible month looks like this:
- Set up shifts, weekly offs and holidays in OTOMATE in the first week, so late marks and half days come out right.
- Each morning, check the live “in right now” list against who you can see at work.
- At month end, put OTOMATE’s monthly register beside the reports you used to make, and look at any person whose days differ.
- Keep the old PC until the first month’s salary has gone out and you are happy with the numbers.
If your PC software still reads the machine over the office network after the change, you can compare the same days in both. Whether it can depends on the model and its settings, so check on yours rather than count on it.
Common problems
- No Cloud Server Setting or ADMS
- Some older or basic models can only be read by desktop software. Send us a photo of the label and we will tell you. Until then, staff can punch from the OTOMATE app with a selfie and location.
- Machine stays offline
- Check the address is exactly
devices.otomateworld.comwith nohttp://, the port is80and Enable Domain Name is on. Then check the machine has an IP address, gateway and DNS; set DNS to8.8.8.8if in doubt. - Office network blocks it
- Ask whoever runs the network to let the machine reach
devices.otomateworld.comon port 80. - Machine shows under waiting machines
- The serial number typed in OTOMATE does not match. Use the one from System Info. Nothing it sends is stored until you add it.
- Wrong punch times
- Fix the machine’s date and time, and the time zone you chose for it in OTOMATE.
- Punches from before the switch missing
- Open the machine in OTOMATE and choose Re-upload punches. The machine sends its stored punches again; ones already received are ignored.