Machine setup
Connect a ZKTeco machine to OTOMATE
ZKTeco attendance machines connect to OTOMATE through their built-in ADMS push. Open Menu → COMM. → Cloud Server Setting, turn on Enable Domain Name, enter devices.otomateworld.com and port 80 with HTTPS off, and add the serial number in OTOMATE. No PC or software is needed at the site.
Setup steps
Open Cloud Server Setting
Press M/OK (or Menu) on the machine and sign in as its administrator. Go to COMM. → Cloud Server Setting. Some models label it ADMS.
Enter the OTOMATE server address
Turn Enable Domain Name on and enter
devices.otomateworld.comas the Server Address. If your machine only accepts an IP address, turn Enable Domain Name off and call us for the address to use.Set the port to 80
Enter
80as the Server Port. Leave HTTPS off and Enable Proxy Server off.Check internet, date and time
In COMM. → Ethernet (or Wi-Fi), check the machine has an IP address, a gateway and a DNS server (for example
8.8.8.8). Then check the date, time and time zone on the machine are right.Save and go back to the main screen
Save the settings and go back to the main screen. Some machines need a restart before they call in.
Add the machine in OTOMATE and wait for Online
Sign in at app.otomateworld.com, open Devices → Add device, choose the brand and type the serial number exactly as the machine shows it (System Info or the sticker on the back). Pick the machine's time zone and save. OTOMATE only accepts punches from machines you have added. The machine shows as Online within a minute of calling in, and staff already enrolled on it are picked up.
Watch: connect a machine
A screen recording of the OTOMATE console with a voice-over: add the machine, enter the settings on it, and watch the first punches arrive.
Before you start
- The machine is connected to the internet by network cable or Wi-Fi. The office router does not need a static IP or port forwarding: the machine calls out to OTOMATE.
- You know the machine's administrator PIN or password, if a menu password is set.
- You have the serial number: on the System Info screen or the sticker on the back of the machine.
- You have an OTOMATE account. If you don't yet, book a free demo and we set it up with you.
Which ZKTeco models work
ZKTeco attendance terminals with Cloud Server Setting or ADMS in the COMM. menu work, including newer face terminals that also send mask and temperature columns (OTOMATE ignores those).
ZKTeco access-control panels and builds with "Security PUSH" firmware (for example inBio and C3 controllers) use a different protocol and are not supported yet.
OTOMATE has not yet tested ZKTeco models on real hardware; the protocol is tested with a simulator on every release. Send us your model name and we confirm it before you start.
What happens after it connects
Once the ZKTeco machine shows as Online, it works with OTOMATE on its own. Nobody needs to download logs.
- Live punches
- Each punch reaches OTOMATE within seconds, with the person, time, in or out, and how they verified (face, finger, card, palm or PIN).
- Staff on the machine
- People already enrolled on the machine are imported with their user number and name. Match the user number to the employee code in OTOMATE.
- Staff from OTOMATE
- People you add, edit or deactivate in OTOMATE are sent to the machine on its next check-in. Faces and fingerprints are still enrolled on the machine itself.
- Internet down
- The machine keeps punches in its own memory and sends them when the line comes back, each with the time it really happened.
- No double counting
- A punch sent twice is stored once.
- From the console
- Sync people again, refresh machine details, ask for old punches again (Re-upload punches) or restart the machine.
OTOMATE does not ask machines to upload fingerprint or face templates, and does not store any it receives. Matching happens on the machine. See security.
Troubleshooting
The usual reasons a machine stays on "Waiting", in the order we check them.
- Shows "Waiting"
- The machine has not called in. Check the server address is exactly
devices.otomateworld.com, the port is80, Enable Domain Name is on and HTTPS is off. Restart the machine after saving. - No internet
- In COMM. → Ethernet or Wi-Fi, check the IP address, gateway and DNS. With DHCP on, most routers fill these in. Try DNS 8.8.8.8 if the domain name will not resolve.
- Domain name will not work
- Some machines cannot look up names, often because DNS is empty with a fixed IP address. Turn Enable Domain Name off and enter the server IP address 50.6.6.81 with port 80 instead. It reaches the same OTOMATE server.
- IP shows 0.0.0.0
- The machine has no network. Check the cable and the router port (the network light on the back should blink), or turn DHCP on so the router gives it an address.
- Office firewall
- The machine talks to OTOMATE over plain HTTP on port 80. If your network blocks outgoing traffic, ask whoever runs it to allow devices.otomateworld.com on port 80.
- Wrong times
- OTOMATE reads the machine clock in the time zone set for the machine in OTOMATE. Newer firmware takes the time from OTOMATE by itself; on older models fix the date and time on the machine and check that time zone. Punches from a machine whose clock is clearly wrong (a 2008 date, say) are held, not lost.
- Serial does not match
- Use the serial from System Info. A machine that calls in with an unknown serial is held back under waiting machines in your account; nothing it sends is stored until you add it.
- Missing old punches
- Open the machine in the console and choose Re-upload punches. Punches OTOMATE already has are ignored.
Questions people ask
Something else? Call +91 90536 35607 or write to hello@otomateworld.com.
Do I need a PC or eTimeTrackLite running for ZKTeco?
No. The machine sends punches straight to OTOMATE over the internet. No office PC has to stay on, and no software is installed.
Do I need a static IP or port forwarding?
No. The machine dials out to OTOMATE, the same way a phone opens a website, so it works behind any ordinary office router.
What happens when the internet goes down?
The machine keeps working and stores punches in its memory. When the connection returns it sends them, and each is filed under the time it really happened.
Does OTOMATE work with ZKTeco access-control panels?
Not yet. Access-control firmware such as inBio and C3 sends a different kind of data. Attendance terminals with ADMS work.
Does OTOMATE store the fingerprints from my ZKTeco machine?
No. OTOMATE does not ask the machine to upload fingerprint or face templates and does not store any it receives. It keeps the punch record only.
Can I add new employees from OTOMATE?
Yes. Add the person in OTOMATE and their name, code and card number go to the machine on its next check-in. They then enrol their face or finger on the machine.
See it on your own machines
Book a free demo. We connect one of your machines with you on a call, and you watch your own staff’s punches arrive.