Machine setup
Connect an eSSL machine to OTOMATE
To connect an eSSL machine, open Menu → COMM. → Cloud Server Setting (on some models ADMS), turn on Enable Domain Name, enter devices.otomateworld.com as the server and 80 as the port with HTTPS off, then add the machine's serial number in OTOMATE. It takes about ten minutes, and punches start arriving within seconds.
Setup steps
Open Cloud Server Setting
Press M/OK (or Menu) on the machine and sign in as its administrator. Go to COMM. → Cloud Server Setting. On some models the screen is called ADMS.
Enter the OTOMATE server address
Turn Enable Domain Name on and enter
devices.otomateworld.comas the Server Address. If your machine only accepts an IP address, turn Enable Domain Name off and call us for the address to use.Set the port to 80
Enter
80as the Server Port. Leave HTTPS off and Enable Proxy Server off.Check internet, date and time
In COMM. → Ethernet (or Wi-Fi), check the machine has an IP address, a gateway and a DNS server (for example
8.8.8.8). Then check the date, time and time zone on the machine are right.Save and go back to the main screen
Save the settings and go back to the main screen. Some machines need a restart before they call in.
Add the machine in OTOMATE and wait for Online
Sign in at app.otomateworld.com, open Devices → Add device, choose the brand and type the serial number exactly as the machine shows it (System Info or the sticker on the back). Pick the machine's time zone and save. OTOMATE only accepts punches from machines you have added. The machine shows as Online within a minute of calling in, and staff already enrolled on it are picked up.
Watch: connect a machine
A screen recording of the OTOMATE console with a voice-over: add the machine, enter the settings on it, and watch the first punches arrive.
Before you start
- The machine is connected to the internet by network cable or Wi-Fi. The office router does not need a static IP or port forwarding: the machine calls out to OTOMATE.
- You know the machine's administrator PIN or password, if a menu password is set.
- You have the serial number: on the System Info screen or the sticker on the back of the machine.
- You have an OTOMATE account. If you don't yet, book a free demo and we set it up with you.
Which eSSL models work
eSSL face, fingerprint and card machines whose COMM. menu has Cloud Server Setting or ADMS work with OTOMATE. They use the ZKTeco push protocol that OTOMATE speaks, and OTOMATE accepts the variations eSSL firmware sends.
A model with neither screen cannot connect yet. Email a photo of the machine's label to hello@otomateworld.com and we will tell you before you change anything.
OTOMATE tests each brand's protocol variations with a simulator on every release. Real eSSL models have not been tested by us yet, so we confirm your model with you on the setup call.
What happens after it connects
Once the eSSL machine shows as Online, it works with OTOMATE on its own. Nobody needs to download logs.
- Live punches
- Each punch reaches OTOMATE within seconds, with the person, time, in or out, and how they verified (face, finger, card, palm or PIN).
- Staff on the machine
- People already enrolled on the machine are imported with their user number and name. Match the user number to the employee code in OTOMATE.
- Staff from OTOMATE
- People you add, edit or deactivate in OTOMATE are sent to the machine on its next check-in. Faces and fingerprints are still enrolled on the machine itself.
- Internet down
- The machine keeps punches in its own memory and sends them when the line comes back, each with the time it really happened.
- No double counting
- A punch sent twice is stored once.
- From the console
- Sync people again, refresh machine details, ask for old punches again (Re-upload punches) or restart the machine.
OTOMATE does not ask machines to upload fingerprint or face templates, and does not store any it receives. Matching happens on the machine. See security.
Troubleshooting
The usual reasons a machine stays on "Waiting", in the order we check them.
- Shows "Waiting"
- The machine has not called in. Check the server address is exactly
devices.otomateworld.com, the port is80, Enable Domain Name is on and HTTPS is off. Restart the machine after saving. - No internet
- In COMM. → Ethernet or Wi-Fi, check the IP address, gateway and DNS. With DHCP on, most routers fill these in. Try DNS 8.8.8.8 if the domain name will not resolve.
- Domain name will not work
- Some machines cannot look up names, often because DNS is empty with a fixed IP address. Turn Enable Domain Name off and enter the server IP address 50.6.6.81 with port 80 instead. It reaches the same OTOMATE server.
- IP shows 0.0.0.0
- The machine has no network. Check the cable and the router port (the network light on the back should blink), or turn DHCP on so the router gives it an address.
- Office firewall
- The machine talks to OTOMATE over plain HTTP on port 80. If your network blocks outgoing traffic, ask whoever runs it to allow devices.otomateworld.com on port 80.
- Wrong times
- OTOMATE reads the machine clock in the time zone set for the machine in OTOMATE. Newer firmware takes the time from OTOMATE by itself; on older models fix the date and time on the machine and check that time zone. Punches from a machine whose clock is clearly wrong (a 2008 date, say) are held, not lost.
- Serial does not match
- Use the serial from System Info. A machine that calls in with an unknown serial is held back under waiting machines in your account; nothing it sends is stored until you add it.
- Missing old punches
- Open the machine in the console and choose Re-upload punches. Punches OTOMATE already has are ignored.
Questions people ask
Something else? Call +91 90536 35607 or write to hello@otomateworld.com.
Do I need a PC or eTimeTrackLite running for eSSL?
No. The machine sends punches straight to OTOMATE over the internet. No office PC has to stay on, and no software is installed.
Do I need a static IP or port forwarding?
No. The machine dials out to OTOMATE, the same way a phone opens a website, so it works behind any ordinary office router.
What happens when the internet goes down?
The machine keeps working and stores punches in its memory. When the connection returns it sends them, and each is filed under the time it really happened.
Can I keep using eTimeTrackLite as well?
The Cloud Server Setting can point at only one server, so once it points at OTOMATE, live punches go to OTOMATE. Your old records stay in eTimeTrackLite; export them to Excel if you want to keep them.
Will my existing staff need to enrol again?
No. Staff already enrolled on the machine stay on it, and OTOMATE imports their user numbers and names when the machine connects.
Which port does the eSSL machine use?
Port 80, plain HTTP, with HTTPS off. Most office networks already allow it.
See it on your own machines
Book a free demo. We connect one of your machines with you on a call, and you watch your own staff’s punches arrive.