Machine setup
Connect a Hikvision terminal to OTOMATE
Hikvision access and attendance terminals send punches to OTOMATE with HTTP Listening: add the terminal in OTOMATE, then point HTTP Listening at devices.otomateworld.com, port 80, using the terminal's own URL from the console. Add the terminal's admin sign-in as a direct connection and OTOMATE also works two-way: it sets HTTP Listening for you, sends staff and cards, fetches missed punches and opens the door.
Two-way setup (recommended)
With the terminal's admin sign-in, OTOMATE configures the terminal itself, so nobody types settings on the device.
Add the terminal in OTOMATE
Open Devices → Add device, choose Hikvision, enter the serial number and save. OTOMATE creates a private push address for this terminal.
Set up the direct connection
On the terminal's page choose Direct connection. Pick how OTOMATE reaches it: Directly (the terminal has a public address or port forward) or Through an on-site connector (see below). Enter the terminal's IP address, port (usually 80), user
adminand its password.Save and test
Click Save and test. OTOMATE shows the model, serial number, firmware and whether the terminal's clock is right.
Auto-configure push
Click Auto-configure push. OTOMATE writes its own address into the terminal's HTTP Listening settings and reads them back to check.
Sync people
Click Sync people to send your employees and card numbers to the terminal, or Import people to bring in staff already on it. Enrol faces or fingerprints on the terminal as usual.
Punch once
Punch at the terminal. The punch appears in OTOMATE within seconds and the terminal shows as Online.
Manual setup: HTTP Listening only
If you do not want to share the admin password, set HTTP Listening by hand. Punches still arrive live; OTOMATE just cannot send anything back.
- Add the terminal in OTOMATE with brand Hikvision. Its page shows the HTTP Listening settings, including a URL that belongs to this terminal only.
- On a computer on the same network, open the terminal's IP address in a browser and sign in as admin.
- Go to Configuration → Network → Network Service → HTTP(S) → HTTP Listening. Some firmware puts it under Network → Advanced Settings → HTTP Listening.
- Event alarm IP address or domain name:
devices.otomateworld.com. URL: the/hik/…path shown in OTOMATE. Port:80. Protocol: HTTP. - Save. Under the privacy settings, turn off Upload Pic. When Auth. if your model has it, so pictures are not sent (OTOMATE discards them anyway).
- Check the terminal's date, time and time zone, then punch once. The terminal shows as Online in OTOMATE when the punch arrives.
The /hik/ URL is what identifies your terminal, so share it only with your installer. If it leaks, press Replace URL on the terminal's page; the old one stops working within 15 seconds. Only owners and admins can see it.
With HTTP Listening only, add people on the terminal itself using the same employee number as in OTOMATE. The first punch of an unknown employee number adds that person to OTOMATE.
The on-site connector
A terminal inside your office network cannot be reached from the cloud. The on-site connector solves that: a small program that runs on any always-on PC at the site and passes OTOMATE's requests to the terminal over an outgoing connection. No port forwarding is needed.
- Create it under Devices → On-site connectors, download it there, and run it on a PC on the same network as the terminal (Node 18 or later).
- It signs in with its own token, which you can revoke at any time.
- It keeps the terminal's password in memory only, never on disk or in logs.
- When it goes quiet, its terminals show as Not reachable in OTOMATE.
What works with Hikvision
| Capability | HTTP Listening only | With direct connection or connector |
|---|---|---|
| Live punches | Yes | Yes |
| Staff and cards sent to the terminal | No | Yes, automatically when people change |
| Import staff from the terminal | From punches | Yes |
| Missed punches fetched | No | Yes, every 10 minutes |
| Open the door from OTOMATE | No | Yes |
| Restart, set the clock | No | Yes |
| Leavers | Remove them on the terminal | Disabled on the terminal automatically |
Terminals with HTTP Listening are confirmed in the DS-K1T320 and DS-K1T805 manuals and reported for others in the DS-K1T series. The integration is built on Hikvision's published ISAPI and tested against a simulated terminal; it has not yet been tested by us on a real Hikvision terminal, so send us your model and we confirm it.
OTOMATE keeps the punch, not the picture or the face template. Pictures sent with events are dropped unread.
Troubleshooting
- No punches arrive
- Check HTTP Listening points at devices.otomateworld.com, port 80, protocol HTTP, and that the URL is the terminal's current /hik/ path from OTOMATE.
- Shows offline when idle
- Some firmware sends no heartbeat, so an idle terminal shows offline until its next punch. Punch once to check.
- Wrong password
- After a refused password OTOMATE stops trying, so it cannot lock the terminal. Save the correct password again in Direct connection.
- Terminal locked
- Hikvision locks sign-in after several wrong passwords. OTOMATE waits for the unlock time (about 30 minutes) before trying again.
- Not reachable
- The cloud cannot reach a terminal inside your network. Use the on-site connector, and check its PC is on.
- Wrong times
- Use Set device time on the terminal's page, or fix the date, time and time zone on the terminal.
Questions people ask
Something else? Call +91 90536 35607 or write to hello@otomateworld.com.
Which Hikvision terminals work with OTOMATE?
Access and attendance terminals with HTTP Listening in their web settings, such as the DS-K1T series. Send us the model and we confirm it.
Do I have to give OTOMATE the admin password?
No. Without it, set HTTP Listening by hand and punches arrive live. The password enables two-way features: people sync, missed punches, door opening and clock setting. It is stored encrypted.
Do I need port forwarding for Hikvision?
No. HTTP Listening sends punches out to OTOMATE. For two-way control of a terminal inside your network, run the on-site connector on any always-on PC instead of opening ports.
Can OTOMATE open the door on a Hikvision terminal?
Yes, with a direct connection or the on-site connector. People you allow slide to unlock in the OTOMATE app, and every attempt is logged.
Does Hik-Connect or ISUP need to be on?
No. OTOMATE uses HTTP Listening and ISAPI. ISUP (the Hikvision cloud protocol) is not used.
See it on your own machines
Book a free demo. We connect one of your machines with you on a call, and you watch your own staff’s punches arrive.