Guide

How to connect an eSSL machine to the cloud

Open Menu › COMM. › Cloud Server Setting (called ADMS on some models), turn on Enable Domain Name, enter the cloud server’s address and port, leave HTTPS and proxy off, and save. The machine then sends every punch to that server over the internet the moment it happens. For OTOMATE the address is devices.otomateworld.com and the port is 80; then add the machine’s serial number in OTOMATE and it shows as online within a minute.

Updated · By the OTOMATE team

What you need

  • An eSSL machine whose COMM. menu has Cloud Server Setting or ADMS. Most current eSSL face and fingerprint machines do.
  • Internet at the machine: a network cable to your router, or Wi-Fi on models that have it. No static IP and no port forwarding.
  • The machine’s serial number, from its System Info screen or the sticker.
  • About ten minutes. No software to install and no PC that has to stay on.

Cloud Server (ADMS) is a push protocol built into the machine: the machine dials out to the server and sends each punch as it happens. The same steps work with any ADMS cloud server. This guide uses OTOMATE’s address because that is the one we can vouch for.

Step by step

  1. Connect the machine to the internet

    On the machine, press M/OK (or Menu) and open COMM. › Ethernet (or Wi-Fi). Turn on DHCP so your router fills in the IP address, gateway and DNS, or type them in. If you set DNS by hand, 8.8.8.8 works almost everywhere.

  2. Open Cloud Server Setting

    Go back to COMM. and open Cloud Server Setting. On some models the screen is called ADMS. If neither exists, the machine cannot push punches to any cloud server; see the questions below.

  3. Enter the server address and port

    Turn on Enable Domain Name. Set Server Address to devices.otomateworld.com and Server Port to 80. If your firmware only accepts a numeric IP address, turn Enable Domain Name off and enter 50.6.6.81 instead.

  4. Leave HTTPS and proxy off

    Keep HTTPS and Enable Proxy Server off. The machine talks to the server over plain HTTP, as these machines’ firmware expects.

  5. Check the date, time and time zone

    Open the machine’s date and time settings and make sure they are right. Punches carry the machine’s own clock, so a wrong clock means wrong punch times.

  6. Save, and note the serial number

    Save and go back to the main screen; restart the machine if it doesn’t connect within a minute. Note the serial number from the System Info screen or the sticker on the back.

  7. Add the machine in OTOMATE

    Sign in at app.otomateworld.com, open Devices › Add device, choose brand eSSL, type the serial number and pick the machine’s time zone. The dialog shows the same server settings and tells you the moment the machine calls in.

  8. Punch once to test

    Punch with a finger, face or card. The punch appears in OTOMATE’s attendance log within seconds. Staff already enrolled on the machine are picked up with their names and codes.

If the machine stays offline

Check these in order. Almost every case is one of the first three.

Address or port typed wrong
The address must be exactly devices.otomateworld.com, with no http:// and no spaces, and the port 80. Enable Domain Name must be on.
No internet at the machine
In COMM. › Ethernet, check there is an IP address, a gateway and a DNS server. Plug a laptop into the same cable to confirm the internet works there.
DNS not set
If the machine can’t turn devices.otomateworld.com into an address, set DNS to 8.8.8.8 and save again.
Network blocks outgoing traffic
Some company firewalls only let approved devices out. Ask whoever runs the network to allow the machine to reach devices.otomateworld.com on port 80.
Serial number doesn’t match
Use the serial from the System Info screen. A machine that calls in with an unknown serial is held under waiting machines and nothing it sends is stored until you add it.
Wrong punch times
Fix the machine’s date and time, and check the time zone you chose for the machine in OTOMATE.
Old punches missing
Open the machine in OTOMATE and choose Re-upload punches. The machine sends its stored punches again; ones already received are ignored.

What happens after it connects

  • Every punch arrives within seconds, with the person, time, in or out, and how they verified.
  • If the internet drops, the machine keeps punches in its memory and sends them when the line returns, each under the time it really happened. A punch sent twice is stored once.
  • People you add, edit or remove in OTOMATE are sent to the machine, so you no longer type staff into each machine.
  • OTOMATE does not ask the machine for fingerprint or face templates and does not store any it receives. Biometrics stay on the machine.

For ZKTeco and Secureye machines the screens are nearly the same; see the ZKTeco and Secureye setup pages. Realtime T-series machines use a different mode, explained in the Realtime guide.

Questions people ask

Something else? Call +91 90536 35607 or write to hello@otomateworld.com.

My eSSL machine has no Cloud Server Setting or ADMS. What now?

Some older or basic models can only be read over the local network by desktop software, and cannot push punches to any cloud server. Send a photo of the machine’s label to us and we will tell you whether it can connect; if not, staff can punch from the OTOMATE app with a selfie and location instead.

Do I need a static IP or port forwarding?

No. The machine dials out to the server, the same way a phone opens a website. Nothing needs to reach into your network.

Which port should I use?

Use port 80 with devices.otomateworld.com. It is the normal web port, so most office networks already allow it.

Will the staff already enrolled on the machine come across?

Yes. When the machine connects, it sends its user list and OTOMATE adds those people with the name and code on the machine. Their fingerprints and faces stay on the machine.

Can one machine send to two cloud servers at once?

No. Cloud Server Setting holds one server address. When you enter OTOMATE’s address, the machine sends its punches to OTOMATE instead of any server set there before.

How long does it take?

About ten minutes for the first machine, most of it finding the right menu. If you would rather not do it alone, we connect your first machine with you on a free call.

Connect your eSSL machine with us

Book a free demo and we’ll set up your first machine together on a call. You’ll see your own staff’s punches arrive while we talk.