Machines

Machines we support, and how to connect them

Keep the hardware you have. OTOMATE talks to the cloud protocol built into most eSSL, ZKTeco, Realtime and Secureye terminals, and works two-way with Hikvision terminals, whatever your staff use to punch: face, finger, card, palm or PIN.

Supported brands

BrandStatusWhat to look for
eSSLSupportedCloud Server Setting or ADMS in the COMM. menu
ZKTecoSupportedCloud Server Setting or ADMS in the COMM. menu
RealtimeSupportedModels with Cloud Server, ADMS or Web Server in the communication menu
SecureyeSupportedModels with Cloud Server, ADMS or Web Server in the communication menu
HikvisionSupported Two-wayTerminals with HTTP Listening and ISAPI in their web settings, such as the DS-K1T series. How it works.
MatrixIn developmentTell us your model; customers waiting on a brand decide which we connect next.
SupremaIn developmentAs above.

eSSL, ZKTeco, Realtime and Secureye use the same cloud protocol, and we test the variations their firmware sends on every release. Hikvision is connected through its own event push and device API. Some brands also sell models built on other platforms; if yours has no Cloud Server, ADMS or Web Server setting, it can't connect yet. Send us the model name and we'll confirm before you buy anything.

Check your machine in a minute

  1. Press M/OK (or Menu) on the machine and open COMM.
  2. Look for Cloud Server Setting, ADMS or Push.
  3. If it's there, your machine works with OTOMATE.
  4. Hikvision: open the terminal's web page and look for HTTP Listening under Network.

Not sure? Email a photo of the machine's label to hello@otomateworld.com and we'll check it for you.

COMM. › Cloud Server Setting
Enable Domain Name
ON
Server Address
devices.otomateworld.com
Server Port
80
Enable Proxy Server
OFF
HTTPS
OFF

What you type on the machine. Menu names vary a little by model.

Setup guide

You need: the machine connected to the internet (network cable or Wi-Fi), and its serial number. It takes about five minutes. If you'd rather not, book a free demo and we'll do it with you on a call.

eSSL

  1. Press M/OK and open COMM. → Cloud Server Setting (on some models ADMS).
  2. Turn on Enable Domain Name. Server address: devices.otomateworld.com. Port: 80.
  3. Leave HTTPS and Proxy off.
  4. Check the date and time on the machine are right, then save and go back to the main screen.
  5. In OTOMATE, open Devices → Add device and enter the serial number from System Info or the sticker.

ZKTeco

  1. Open Menu → COMM. → Cloud Server Setting.
  2. Turn on Enable Domain Name. Server address: devices.otomateworld.com. Port: 80.
  3. Leave HTTPS and Proxy off.
  4. Check the date and time on the machine are right, then save and go back to the main screen.
  5. In OTOMATE, open Devices → Add device and enter the serial number from System Info or the sticker.

Realtime

  1. Open Menu → Comm. and look for Cloud Server, ADMS or Web Server. The name varies by model.
  2. Enter devices.otomateworld.com as the server (turn on domain name if asked) and 80 as the port.
  3. Leave HTTPS and Proxy off.
  4. Check the date and time on the machine are right, then save and go back to the main screen.
  5. In OTOMATE, open Devices → Add device and enter the serial number from System Info or the sticker.

Realtime models that use only Realtime's own cloud app, with no Cloud Server / ADMS setting, can't connect yet.

Secureye

  1. Open Menu → COMM. and look for Cloud Server Setting, ADMS or Web Server. The name varies by model.
  2. Enter devices.otomateworld.com as the server and 80 as the port.
  3. Leave HTTPS and Proxy off.
  4. Check the date and time on the machine are right, then save and go back to the main screen.
  5. In OTOMATE, open Devices → Add device and enter the serial number from System Info or the sticker.

Secureye sells models from more than one platform; the ones with Cloud Server / ADMS work.

Hikvision

  1. In OTOMATE, open Devices → Add device, choose Hikvision and enter the serial number.
  2. Choose Direct connection and enter the terminal's IP address, port (usually 80), user admin and its password. Click Save and test: OTOMATE shows the model, serial and firmware.
  3. Click Auto-configure push. OTOMATE writes its own address into the terminal, so nobody types settings on the device.
  4. Click Sync people to send your employees and card numbers to the terminal, then enrol faces or fingerprints on the terminal as usual.

What works with Hikvision: punches arrive live in attendance, reports and the app; OTOMATE sends people and cards to the terminal, imports people from it, recovers punches it missed, opens its door, restarts it and keeps its clock right.

At a customer site the cloud can't reach a terminal inside the office network, so a small on-site connector runs on any always-on PC in the office and passes the work along over an outgoing connection. No port forwarding is needed. Download it from Devices → On-site connectors.

Built on Hikvision's published device API and tested against a simulated terminal; send us your model and we'll confirm before you buy.

Troubleshooting

The usual reasons a machine doesn't show as online, in the order we check them.

The machine shows "Waiting" in OTOMATE

It hasn't called in yet. Check the server address is exactly devices.otomateworld.com, the port is 80, and Enable Domain Name is on. Some machines need a restart after saving.

The machine has no internet

In COMM. → Ethernet (or Wi-Fi), check it has an IP address, a gateway and a DNS server. With DHCP on, most office routers fill these in. Try DNS 8.8.8.8 if the domain name won't resolve.

The office network blocks it

The machine talks to us on port 80, the normal web port, so most networks allow it. If yours blocks it, ask whoever runs the network to allow outgoing traffic to devices.otomateworld.com on port 80.

Punches show the wrong time

OTOMATE reads the machine's clock in the time zone you set for the machine. Fix the date and time on the machine and check the machine's time zone in OTOMATE.

An old punch is missing

Open the machine in the console and choose Re-upload punches. The machine sends its stored punches again; ones we already have are ignored.

The serial number doesn't match

Use the serial number from the machine's System Info screen. If a machine calls in with a serial we don't know, it appears under waiting machines in your account and nothing it sends is stored until you add it.