Guide

Selfie attendance with GPS: how it works and how to set it up

With selfie attendance, staff punch in and out from their phone: the app takes a selfie and the phone’s GPS location, and the server checks the location before it accepts the punch. In office mode the punch is accepted only inside a circle (geofence) around the branch; in field mode staff can punch from anywhere and their location is saved with the punch. It suits offices without a machine and staff who work on the move.

Updated · By the OTOMATE team

How a selfie punch is checked

A phone can be fooled more easily than a machine on a wall, so the important checks happen on the server, not in the app:

  • Distance. In office mode, the server measures the distance from the branch centre and refuses a punch outside the geofence.
  • GPS accuracy. A location fix that is less accurate than your limit is refused, so a vague fix can’t pass for “inside”.
  • Fake locations. Android reports locations that come from mock-location apps, and those punches are refused.
  • Shift window. If you allow punching only around shift time, punches outside the window are refused.
  • Selfie. When a selfie is required, a punch without one is refused.
  • One per minute. Two punches by the same person less than a minute apart are refused.

There is no face recognition. The selfie is kept so a manager or HR can look at it if a punch is questioned. That keeps the system simple and avoids storing face templates.

Office mode or field mode

SettingOffice (Indoor)Field
Where staff can punchInside the branch geofenceAnywhere
What is savedLocation, distance from the branch, selfieLocation, selfie
Good forOffices, shops and sites without a machineSales, service and delivery staff

Field staff can also file visit reports from the app, with the client or site, a note and their location, so managers see where the day went.

Setting it up in OTOMATE

  1. Set each branch’s location and geofence

    In Branches, set the branch’s location on the map and its geofence radius. The radius can be 20 to 5,000 metres; 200 metres is the default and suits most offices and factories.

  2. Turn on app punching

    Open App punching. Under Company default, turn app punching on and choose the mode: Indoor (inside the geofence only) or Field (anywhere, location recorded).

  3. Choose the checks

    Decide whether a selfie is required, how accurate the GPS fix must be (100 metres by default; 10 to 1,000 metres), and whether punching is allowed only around shift time.

  4. Add branch and people overrides

    Use Branch overrides and People overrides where the rules differ, for example field mode for the sales team. The most specific rule wins: the person’s own, then their branch’s, then the company default.

  5. Set how long selfies are kept

    Under Privacy, set Keep selfies for. The default is 90 days; you can choose 7 to 730 days. Older selfies are deleted automatically.

  6. Staff punch from the app

    Staff sign in to the OTOMATE app on their phone and tap to punch in or out. The app shows the reason in plain words if a punch is refused, in English or Hindi.

  7. Review app punches

    In App punching, HR sees each app punch with the selfie, the distance from the branch and the GPS accuracy, and can approve or flag it.

Choosing the geofence radius

  • Small office or shop: 100–200 metres. Phone GPS indoors is often 20–50 metres off, so very small circles cause false refusals.
  • Factory or campus: large enough to cover the whole site from gate to the far building, often 300–500 metres.
  • Construction site: cover the site and its labour camp if staff punch there.

Start a little generous, look at the distances on the first week’s punches, and tighten if you need to.

Privacy and fairness

  • Tell staff in writing what is collected (a selfie and location at the moment of each punch, not tracking through the day) and why.
  • Keep selfies only as long as you need them. OTOMATE deletes them after the period you set, 90 days by default.
  • Selfies are visible to the person and to HR, not to the whole company.
  • Treat a refused punch as a question, not an accusation: GPS indoors is imperfect. Staff can send a missed-punch request with a reason.

Privacy laws such as India’s Digital Personal Data Protection Act, 2023 and the EU’s GDPR expect you to collect personal data for a clear purpose, tell people about it and keep it no longer than needed. Check what applies where you operate, and read OTOMATE’s security page for how the data is protected.

Questions people ask

Something else? Call +91 90536 35607 or write to hello@otomateworld.com.

Can staff fake their location?

Android reports locations from mock-location apps, and OTOMATE refuses those punches. Accuracy limits and the selfie make the rest hard. No phone system is perfect, which is why HR can review and flag app punches.

Does selfie attendance use face recognition?

Not in OTOMATE. The selfie is kept for review, and no face template is made or stored.

What geofence radius should I use?

200 metres, the default, works for most offices. Use 100–200 metres for a small office, larger for a factory or campus. The allowed range is 20 to 5,000 metres.

Do staff need internet to punch?

Yes. The punch is checked on the server when it is made, so the phone needs mobile data or Wi-Fi at that moment.

Is the employee tracked all day?

No. The location is taken only at the moment of a punch or a field report.

Can I use the app and a biometric machine together?

Yes. App punches and machine punches land in the same attendance register, reports and payroll. A common setup is the machine at the gate and the app for field staff.

Try app punching with your team

Book a free demo. We’ll set up a branch geofence with you and you can punch from your own phone during the call.