The law today
The four Labour Codes came into force on 21 November 2025. The Occupational Safety, Health and Working Conditions Code, 2020 (the OSH Code) replaced the Factories Act, 1948, and it now carries the overtime rule for factories and other establishments.
- Daily limit
- No worker may be required or allowed to work more than 8 hours a day (OSH Code, section 25). Intervals and spread-over are set by the appropriate government.
- Weekly limit
- 48 hours a week, per the government’s explainer and rule 64 of the Central Rules, 2026.
- Overtime rate
- Twice the rate of wages (section 27). The Code on Wages says the same: not less than twice the normal rate (section 14).
- Daily or weekly
- Overtime is counted on a daily or weekly basis, whichever is more favourable to the worker (section 27).
- Consent
- A worker can be required to work overtime only with their consent (section 27).
- Overtime cap
- The appropriate government may set the total overtime hours allowed (section 27).
Who your “appropriate government” is matters. The Central Rules, 2026 apply where the Central Government is the appropriate government. Most private factories and shops come under their State Government’s rules. The government has said that, during the transition, existing state rules continue in force. Check your state’s current rules for the exact hours and overtime cap.
What changed from the Factories Act
| Rule | Factories Act, 1948 | OSH Code, 2020 |
|---|---|---|
| Daily hours | 9 hours (section 54) | 8 hours (section 25) |
| Weekly hours | 48 hours (section 51) | 48 hours (explainer; Central Rules rule 64) |
| Overtime rate | Twice the ordinary rate of wages (section 59) | Twice the rate of wages (section 27) |
| Wages for the rate | Basic wages plus allowances, without bonus or overtime | “Wages” as the Code defines it: basic pay, dearness allowance and retaining allowance, with excluded allowances above half of pay added back |
| Overtime cap | 75 hours a quarter, as the government notes | Set by the appropriate government |
The formula
The Central Rules, 2026 spell out the arithmetic for a monthly-paid worker (rule 69): the daily wage is 1/26th of monthly wages. Divide that by the normal hours in a day to get the hourly rate.
Hourly rate = daily rate ÷ normal daily hours
Overtime pay = overtime hours × hourly rate × 2
Rule 69 also rounds part hours on a day: 15 to 30 minutes counts as half an hour, and more than 30 minutes counts as a full hour. A daily-rated worker’s overtime starts after 8 hours in a day; for other workers, the rule uses 48 hours in a week. Your state’s rules may differ in detail.
Worked example
A machine operator earns ₹15,600 a month in wages (Basic + DA). The normal day is 8 hours and the week is six days.
Hourly rate = 600 ÷ 8 = ₹75
Overtime rate = 75 × 2 = ₹150 an hour
One week, the operator works these hours:
| Day | Hours worked | Over 8 hours |
|---|---|---|
| Monday | 11 | 3 |
| Tuesday | 8 | 0 |
| Wednesday | 8 | 0 |
| Thursday | 8 | 0 |
| Friday | 6 | 0 |
| Saturday | 8 | 0 |
| Total | 49 | 3 |
Weekly basis = 49 − 48 = 1 hour
More favourable to the worker = 3 hours
Overtime pay = 3 × 150 = ₹450
The short Friday does not cancel Monday’s long day when you count daily. That is the point of “whichever is more favourable”. If your state’s rules count overtime only by the week for monthly staff, the answer would be 1 hour, so check which rule applies to you.
Common mistakes
- Paying overtime at 1× or 1.5×. The statutory rate is 2×.
- Working out the rate from Basic only, when DA and retaining allowance are part of wages.
- Offsetting a long day against a short day without checking which basis favours the worker.
- Giving comp-off instead of overtime pay, without checking that your state’s rules allow it.
- Not keeping an overtime register. The Central Rules have a combined register for wages, overtime and deductions.
This post explains the general rule. It is not legal advice; confirm your state’s rules with your CA or labour consultant.
How OTOMATE does it
OTOMATE works out overtime per day from the punches: work beyond the shift’s own hours (start to end, less the break) counts in full once it reaches the shift’s “overtime after” minutes, 30 by default. Work on a weekly off or holiday can count as overtime in full. If you require approval, overtime is paid only after HR approves it, and HR can set the figure for any day, for example to apply rounding or a weekly rule.
In payroll, approved overtime is paid at 1×, 1.5× or 2× (2× by default). The hourly rate is gross pay ÷ your days basis (calendar days, 30 or 26) ÷ shift hours, and each payslip line shows the sum. On the 26-day basis at 2×, this rate is never below the statutory one, because gross pay includes Basic and DA; on a 30-day or calendar basis it can be lower, so check. OTOMATE does not apply the 48-hour weekly test or the 15–30 minute rounding by itself. Payroll comes with the Business and Enterprise plans.
Sources
- The Occupational Safety, Health and Working Conditions Code, 2020 (Act 37 of 2020) · Ministry of Labour and Employment
- Occupational Safety, Health and Working Conditions (Central) Rules, 2026, G.S.R. 345(E), 8 May 2026 · Ministry of Labour and Employment
- Government makes the four Labour Codes effective (21 November 2025) · Press Information Bureau
- Occupational Safety, Health and Working Conditions (OSH) Code, 2020: explainer · Press Information Bureau
- The Code on Wages, 2019 (Act 29 of 2019) · Ministry of Labour and Employment
- The Factories Act, 1948 (sections 51, 54 and 59) · India Code